LIGHT SWITCH
The ignition switch key must be in the ON/RUN
position to operate the headlights. Press the top of the
switch to place the headlights on high beam. Move the
switch to the center position to place the headlights on
low beam. Press the bottom of the switch to turn off the
headlights.
WINCH SWITCH (IF EQUIPPED)
Press the top of the rocker switch to spool line out from
the winch. Press the bottom of the rocker switch to
spool line in to the winch. Move the rocker switch to
the center position to stop spooling.
36
FEATURES AND CONTROLS
To Next Page
Loading...
