ITEM
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
REMARKSHOURS CLNDR
MILES
(KM)
Drive shafts 100 H 12 M
1000
(1600)
Remove and grease
D
Spark plug
100 H 12 M
1000
(1600)
Inspect; replace as needed
XU
Wiring
100 H 12 M
1000
(1600)
Inspect for wear, routing, security;
apply dielectric grease to
connectors subjected to water,
mud, etc.
D
XU
Clutches (drive and
driven)
100 H 12 M
1000
(1600)
Inspect; clean; replace worn parts
D
Front wheel
bearings
100 H 12 M
1000
(1600)
Inspect; replace as needed
D Brake fluid 200 H 24 M
2000
(3200)
Change every two years
Ratcheting cam
chain tensioner
200 H -
2000
(3200)
Check; adjust as needed
Suspension
bushings
250 H 24 M
2000
(3200)
Inspect; replace if necessary
XU
Spark arrester
300 H 36 M
3000
(4800)
Clean out
D Valve clearance - -
5000
(8000)
Inspect; adjust as needed
XU Coolant - 60 M -
Change coolant
D
Toe adjustment
-
Inspect periodically; adjust when
parts are replaced
D
XU
Auxiliary brake (if
equipped)
-
Inspect daily; adjust as needed
Headlight aim
-
Adjust as needed
LUBRICATION RECOMMENDATIONS
Check and lubricate all components at the intervals outlined in the Periodic
Maintenance Chart section, or more often under severe use, such as wet or
dusty conditions. Items not listed in the chart should be lubricated at the general
lubrication interval.
70
MAINTENANCE
To Next Page
Loading...
Need help?
General
