WHEEL INSTALLATION
WARNING
Improperly installed wheels can adversely affect tire wear and vehicle
handling, which can result in serious injury or death. Always ensure that all
nuts are torqued to specification. Do not service axle nuts that have a cotter pin
installed. Your dealer can assist.
NOTICE
Front and rear wheels have different wheel offsets. Make sure the correct
wheel is used in the correct location.
1. Place the transmission in PARK.
2. Place the wheel on the hub with the valve stem toward the outside.
3. Attach the wheel nuts and finger-tighten.
4. Carefully lower the vehicle to the ground.
5. Torque the wheel nuts to specification.
94
MAINTENANCE
To Next Page
Loading...
