NOTICE
Never adjust spring preload to an installed length longer than the factory length
or shorter than the minimum length as shown in the following chart. Damage to
the suspension could result. When decreasing preload, make sure at least two
turns of preload are holding the retainer against the spring.
Initial RTS Shock Preload Settings
(Measure spring length with suspension off the ground)
Rider Weight Model Factory Installed
Length
Minimum Installed
Length
For Factory-Installed Springs
<160 lb (<73 kg)
PRO RMK 10.75 in (27.3 cm)
9.8 in (24.9 cm)
RMK KHAOS 10.375 in (26.3 cm) 9.8 in (24.9 cm)
160-220 lb (73-100
kg)
PRO RMK & RMK
KHAOS
*10.5 in (26.7 cm) 9.8 in (24.9 cm)
PRO RMK (Velocity) *10.25 in (26 cm) 9.8 in (24.9 cm)
220-280 lb (100-127
kg)
PRO RMK 10.125 in (25.7 cm) 9.8 in (24.9 cm)
RMK KHAOS 10.125 in (25.7 cm) 9.8 in (24.9 cm)
280-340 lb (127-154
kg)
PRO RMK 9.8 in (24.9 cm) 9.8 in (24.9 cm)
RMK KHAOS 10 in (25.4 cm) 9.8 in (24.9 cm)
*Factory Setting
For Optional 250 lb./in. Stiff Springs (see your dealer)
250-300 lb (113-136
kg)
ALL 10.25 in (26 cm) 10 in (25.4 cm)
300-350 lb (136-159
kg)
ALL 10 in (25.4 cm)
98
THE PERFECT FIT
To Next Page
Loading...
Need help?
General
