PRE-SEASON MAINTENANCE
The chart below outlines inspection procedures that should be performed before
the start of each riding season.
Air Box / Intake Ducts /
Intake Tubes
Inspect
Bogie / Wheel Condition /
Fastener Bolts
Inspect or Adjust
Brake Fluid Level / Leaks /
Fluid Condition
Inspect or Adjust
Brake Hose Condition /
Routing
Inspect or Adjust
Brake Lever
Inspect or Adjust
Brake Pads / Brake Disc
Inspect as needed
Controls
Inspect or Adjust the following:
• Auxiliary Shut-Off
• Throttle Release Switch
• Ignition Switch
• Headlights / Brake light / Taillights
• Hand / Thumbwarmers
• PERC Reverse System
Coolant Level
Inspect or Adjust
Cooling Hoses / Pipes Inspect or Adjust
Drive / Driven Clutch
Condition
Inspect or Adjust; Clean if needed
Drive Belt Condition / Ride
Out
Inspect or Adjust
Drive Chain Tension (If
Equipped)
Inspect or Adjust
Engine Mounts Inspect or Adjust
Exhaust System /
Retaining Springs / Heat
Shields
Inspect or Adjust
134
MAINTENANCE
To Next Page
Loading...
