4. If choosing to apply a cleaner, wax or polish, make sure it does not contain a
colorant dye and/or test on an inconspicuous area of the panel. Also make
sure the product is safe to use on Molded Nylon 6 material with or without a
painted finish.
5. Hand wash the exhaust system and dry the pipe and silencer with a clean
shop towel.
6. Apply “spray” metal protectant on exposed metal components, such as the
exhaust pipe, silencer, shock shafts, and suspension springs / pivots.
IMPORTANT
Do not spray metal protectant on the drive or driven clutches.
MOLDED NYLON 6 BODY PANELS
IMPORTANT
The use of a high speed/orbital polisher/buffer is not recommended on Molded
Nylon 6 components and could result in color fading.
REFERENCE NUMBER DESCRIPTION
q
Hood Trim, LH and RH
w
Console Trim, LH and RH
e
Side Panel Trim, LH and RH
172
MAINTENANCE
To Next Page
Loading...
Need help?
General
