What to do if hot water or coffee does not flow from the filter holder nozzles in my Polaris PCM 1536E Adore Cappuccino Coffee Maker?
First, ensure the tank is filled with water. It's possible air has entered the coffee machine, causing the pump to shut down. If this occurs, repeat the steps described in paragraph 6 (Before you start). If the issue persists, contact a qualified service center.
What to do if the coffee flows too slowly from my Polaris PCM 1536E Adore Cappuccino Coffee Maker?
Check the ground coffee filter for clogs and clean it with a small brush or suitable tool. Insufficient water flow through the perforated disc in the socket of the coffee machine body may also be the cause. If the disk holes are clogged after several months of use, clean the disk with a brush or toothpick, then turn on the coffee maker and run water through it without the filter holder. Ensure the water tank is properly and tightly installed and that there is enough water in the tank.
How to fix no steam flowing from the steam hose nozzle of my Polaris Coffee Maker?
Remove any deposits that may have formed inside the nozzle of the milk foam delivery tube. Also, check the water level in the container.
What to do if coffee is poured through the filter holder of my Polaris Coffee Maker?
This may be happening because too much ground coffee was poured into the filter, causing the filter holder to be loosely fixed. Wait for the coffee machine to cool down, then re-prepare the drink using the appropriate amount of ground coffee.
General| Product Type | Coffee Maker |
|---|---|
| Model | PCM 1536E Adore Cappuccino |
| Voltage | 220-240 V |
| Pressure | 15 bar |
| Hot Water Supply | Yes |
| Removable Drip Tray | Yes |
| Material | Stainless Steel |
| Features | Milk Frother |
| Type | Espresso |
| Used Coffee | Ground Coffee |
To Next Page