EasyManuals Logo

Polaris PHOENIX Phoenix 200 User Manual

Polaris PHOENIX Phoenix 200
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
45
OPERATION
Starting the Engine
6. Squeeze the left brake lever.
NOTE: The starter will not engage unless the rear brake is applied.
Always squeeze and hold the left brake lever before
attempting to start the engine.
7. Press the start button.
8. Activat e the starter for a maximum of five seconds, releasing the
button when the engine starts. If it doesn’t start, release the starter,
wait five seconds, then activate for another five seconds. Repeat
until the engine starts.
9. If the engine slows or stops, position the choke lever half way to
allow proper engine warm up. Vary the RPM slightly with the
throttle to aid in warm up.
10. When the engine idles smoothly, push the choke lever all the way
to the right.
CAUTION
Operating the vehicle immediately after starting could cause
engine damage. Allow the engine to warm up for several minutes
before operating the vehicle.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris PHOENIX Phoenix 200 and is the answer not in the manual?

Polaris PHOENIX Phoenix 200 Specifications

General IconGeneral
BrandPolaris
ModelPHOENIX Phoenix 200
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals