Polaris PRE S 0612 H

Note! Some 6-fin models of radiators are supplied with cured roller-leg
platforms. The installation of this kind of platforms is the same (figure 5).
VI. The installation of towel-
rack
1. The towel-rack slots
should be joined with the fin
edges as shown in the picture
(figure 6 A).
2. You should push slightly
the towel-rack to make it
firmly join together. (figure 6
B)
VII. The radiator operation
Make sure that the radiator is placed in vertical position to reduce the risk of overheating, fire or
electric shock.
 Before plugging the device in outlet, please make sure, that the power control is in the OFF position and
the thermostat control in the LOW position.
 PХОКsО rШtКtО МХШМФаТsО tСО tСОrmШstКt МШЧtrШХХОr uЩ tШ «mКб» ЩШsТtТШЧ. UsО tСО ЩШаОr rОРuХКtШr tШ
choose the required temperature: I position – low power, II position – medium power and when two
regulators are switched on – high power mode.
Figure 3
Figure 4
Towel-rack
Plastic rails


Figure 6
Radiator fins
The towel-rack leg
Figure 5