POLARIS RANGER 900 XP
FOR ALL TECHNICAL QUESTIONS, PLEASE CALL
DFK AMERICA INC.
(630) 324-8585
17
Cut the hose between pliers and insert tightening straps at loose ends. Install the small “Y” coupling into
the original hose and into the heater hose (included). Tighten all (3) straps hard and lead the water hose
from the engine to the central floor tunnel. It is necessary to keep the heater hose(red arrow) in direction
of down and forward. Side view.
Lead the water hose (red arrow) throught the floor tunel.
To Next Page
Loading...
