PARK BRAKE LEVER
Always apply the service brakes before engaging or releasing the park brake. To
help prevent the vehicle from rolling, set the park brake when parking the
vehicle. When the park brake is set and the park brake indicator is illuminated,
motor speed is limited. If the accelerator is applied, this limiting feature prevents
operation, which protects the park brake pads from excessive wear.
TIP
This feature will not operate properly if the park brake connector or switch
(under the hood) malfunctions or becomes disconnected, or if the switch has
moved. Check for disconnection, then see your dealer or other qualified
service person promptly if this feature fails to operate properly.
1. To set the park brake, apply the brakes.
2. Pull the park brake lever upward as far as possible.
3. To release the park brake, apply the brakes. Press the park brake release
inward and move the lever downward as far as possible.
46
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
