INDICATOR LAMP REPLACEMENT
To replace the indicator lamp, do the following:
1. Lift the hood.
2. Reach in behind the console panel and lift the release to unplug the light
from the harness.
3. Using a flathead screwdriver, press on the tab on the top of the light to
remove the indicator light assembly from the console panel.
4. Locate the expired lamp. Using a screwdriver, rotate the lamp 1/4 turn
counter-clockwise.
5. Grip the lamp with a needle-nose pliers and remove it from the assembly.
6. Install the new lamp. Using a screwdriver, rotate the lamp 1/4 turn clockwise
to seat it.
7. Snap the assembly back into the console panel. Reconnect the harness.
8. Close the hood.
92
MAINTENANCE
To Next Page
Loading...
