55
OPERATION
Polaris 3-Mode Throttle Control Switch (if equipped)
The Polaris 3-Mode Throttle Control Switch has three
positions:
• Performance (PERF)
• Standard (STND)
• Work (WORK)
Performance
The performance (PERF) setting maximizes throttle response
for quick acceleration along with full horsepower and torque.
Standard
The standard (STND) setting provides a balance of throttle,
full horsepower, and torque for everyday activities.
Work
The work (WORK) setting optimizes slow drivability for per-
forming precise tasks by limiting throttle response and maxi-
mum throttle opening.
NOTE: Always use low gear for any of the following conditions
regardless of the selected throttle control setting. Refer to
page 22 for more information on gear selection.
• Operating in rough terrain or over obstacles
• Loading the vehicle onto a trailer
• Towing heavy loads
• Driving frequently at low RPM or at ground speeds
below 7 MPH (11 km/h)
To Next Page
Loading...
