EasyManuals Logo

Polaris RMK Shift User Manual

Polaris RMK Shift
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
80
MAINTENANCE
Spark Plugs
A new engine can cause temporary spark plug fouling due to the preser-
vative added during the assembly process. Avoid prolonged idle speeds,
which cause plug fouling and carbonization. Change the spark plugs
every 2000-2500 miles (3200-4000 km).
Use recommended spark plugs with the proper gap.
Use only resistor-type spark plugs.
Torque spark plugs to 18-22 ft. lbs. (24-30 Nm).
Always carry spare spark plugs.
Spark Plug Removal and Replacement
1. Remove the spark plug cap.
2. Using the special wrench provided in the tool pouch, rotate the
spark plug counterclockwise to remove it.
3. Reverse the procedure for spark plug installation.
4. Torque to specification.
5. Reinstall the spark plug cap.
CAUTION
Using non-recommended spark plugs can result in serious engine damage. A
spark plug with a heat range too high will always cause engine damage if the
engine is operated in conditions more severe than intended for that plug.
Always use the spark plugs recommended for your snowmobile. See your
Owner’s Manual Supplement.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris RMK Shift and is the answer not in the manual?

Polaris RMK Shift Specifications

General IconGeneral
BrandPolaris
ModelRMK Shift
CategorySnowmobiles
LanguageEnglish

Related product manuals