Polaris SLINGSHOT SL 2019 User Manual

CHANGING THE SECURITY LEVEL
The security level can be changed at any time by using the following procedure.
1. Unlock the security system.
2. With the engine off and the park brake engaged, press and release the
MODE button repeatedly until “SECURE” displays in the gauge.
3. Press and hold the MODE button until “SETCODE” displays.
4. Press and release the MODE button once to display the current security
level.
5. Press and hold the MODE button to cycle through the three security level
options. Release the button when the desired security level displays.
6. To save the displayed setting, press and release the MODE button once.
“EXIT” will display.
7. Press and hold the MODE button to exit the security menu.
UNLOCKING THE SECURITY SYSTEM
1. Turn the ignition switch to the ON position. The gauge will display
“ENtCOdE”.
2. Press and release the MODE button once to advance the digit by one
increment. Repeat until the desired digit displays.
3. Press and hold the MODE button to save the digit and advance to the next
digit.
4. Repeat this process for the remaining 3 digits.
5. When the fourth digit is saved, the system unlocks and “SUCCESS” displays
in the gauge. If the passcode entered was not correct, the system remains
locked and “BAdCOdE” displays in the gauge. Re-enter the correct
passcode.
46
FEATURES AND CONTROLS
Downloaded from ManualsNet.com search engine

Polaris SLINGSHOT SL 2019 Specifications

General

Brand	Polaris
Model	SLINGSHOT SL 2019
Category	Automobile
Language	English