SPARK PLUG SERVICE
1. Open the hood.
CAUTION
A hot exhaust system and engine can cause burns. Allow a hot engine to cool
or wear protective gloves when removing a spark plug for inspection.
2. Unplug the spark plug wire connectors
q
from the ignition coils.
3. Remove the ignition coil bolts
e
.
4. Remove the ignition coils
w
.
CAUTION
Wear eye and face protection when using pressurized air.
5. Before removing the spark plugs, use compressed air to remove any loose
dirt or debris from the spark plug wells.
NOTICE
The spark plugs must be installed before using compressed air in this area.
95
MAINTENANCE
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
