FEATURES AND CONTROLS
SWITCHES
q
Ignition Switch
r
Headlight Switch
w
Engine Stop Switch
t
4x4 Switch
e
Mode/Reverse Override Switch
IGNITION SWITCH/LIGHT SWITCH
Use the ignition switch to start the engine. The key can be removed from the
switch when it is in the OFF position.
OFF Turn the key to the OFF position to stop the engine. Electrical circuits are off.
RUN Turn the key the RUN position to activate electrical components. Electrical
circuits are on. Electrical equipment can be used.
START Turn the key to the START position to engage the electric starter. See the
Starting the Engine section for starting procedures.
37
FEATURES AND CONTROLS
To Next Page
Loading...
