121
MAINTENANCE
Fuse Replacement
If the engine stops or will not
start, or if you experience other
electrical failures, a fuse may
need replacement. Locate and
correct any short circuits that
may have caused the blown
fuse, then replace the fuse.
Spare fuses are provided in a
compartment on the top of the
access door.
1. Open the front box cover.
2. Remove the access panel.
See page 111.
3. Remove fuse box cover.
4. Remove the suspect fuse
from the fuse panel. If the
fuse is blown, install a new
fuse with the same
amperage.
5. Secure the fuse box cover
and access panel.
6. Secure the front box cover.
Fuse Box
Label inside the
Fuse Box Cover
To Next Page
Loading...
