130
MAINTENANCE
Vehicle Immersion
If your vehicle becomes immersed, major engine damage can result if
the machine is not thoroughly inspected. Take the vehicle in for service
before starting the engine. Your POLARIS dealer can provide this
service.
1. Move the ATV to dry land or at the very least, to water below the
footrests.
2. Check the air box. If water is present, dry the air box and replace the
filter with a new filter.
3. Remove the spark plug.
4. Turn the engine over several times using the electric start.
5. Dry the spark plug. Reinstall the plug or install a new plug.
6. Attempt to start the engine. If necessary, repeat the drying
procedure.
NOTICE: Serious damage can occur after immersion if fluids are not changed
promptly. Your POLARIS dealer can assist
.
7. Take the vehicle in for service as soon as possible, whether you
succeed in starting it or not. Your POLARIS dealer can provide the
required service.
8. If water has been ingested into the PVT, follow the procedure on
page 134 for drying out the PVT.
To Next Page
Loading...
