47
FEATURES AND CONTROLS
Active Descent Control (ADC) System
The ADC system (if equipped) allows engine braking to all four wheels
when the vehicle descends a hill or incline. Always move the 4X4
switch to ADC 4X4 before ascending or descending a hill.
Engaging Active Descent Control
The ADC system will automatically engage when all four of the
following conditions occur:
• The 4X4 switch must be in the ADC 4X4 position
• Vehicle speed must be 15 MPH (25 km/h) or less
• The throttle must be closed (throttle lever released)
• The transmission must be in gear (high, low or reverse)
Disengaging Active Descent Control
The ADC system will automatically disengage if at least one of the
following conditions occur:
• The 4X4 switch is moved out of the ADC 4X4 position
• Vehicle speed exceeds 15 MPH (25 km/h)
• The throttle is open (throttle is applied)
• The transmission is shifted to neutral or park
X2 Model: The vehicle is on flat ground, or not actively descending a
hill
To Next Page
Loading...
