3.62
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
32. Before installing the gear/stator housing cover, install
the Water Pump Seal Saver (PA-45401) onto the
water pump shaft.
33. Install a NEW gasket to the gear/stator housing
cover and crankcase. With the tools installed,
carefully place the gear/stator housing cover over the
protection tools.
34. Apply Crankcase Sealant (PN 2871557) to the
outside edges of the crankcase halves (See arrows),
where the crankcases mate. (See photos below.)
This helps to prevent coolant leakage.
35. Install the gear/stator housing gasket onto he
crankcase.
ENGINE
To Next Page
Loading...
