72
MAINTENANCE
Engine Oil
Oil and Filter Change
1. Position the vehicle on a level
surface.
2. Place the transmission in PARK.
3. Start the engine. Allow it to idle
for 2-3 minutes.
4. Stop the engine.
5. Clean the area around
the drain plug.
6. Remove the drain plug.
Drain the oil into a drain
pan.
7. Clean the drain plug.
Reinstall the drain plug
with a new sealing
washer.
8. Torque to specification.
See page 70.
CAUTION
Hot oil may result in serious burns. Do not allow hot oil to contact skin.
To Next Page
Loading...
