93
MAINTENANCE
Breather Filter/Hose
The breather filter is on the hose between the engine and air box.
1. Remove the left side panel.
See page 87.
2. Remove the hose clamps from
the filter and pull the filter out of
the hoses.
3. Inspect the filter for debris. Blow
gently through the filter in the
direction of the arrow to check
for clogging. Replace a damaged
or clogged filter.
4. Check the hoses for cracks, deterioration, abrasion, or leaks.
Replace as needed.
5. Reinstall the filter and hose clamps.
NOTE: The filter is effective with the arrow pointing in either direction.
Operation of your vehicle without a breather filter can cause engine damage.
To Next Page
Loading...
