TAILLIGHTS/BRAKE LIGHTS REPLACEMENT
Procedure to replace taillights:
TO REPLACE LEFT TAILLIGHT:
1. Remove the harness connector from the back of the light assembly.
2. Remove the 3 fasteners securing the light assembly and remove the light
assembly.
3. Install the new light assembly and tighten the 3 fasteners to secure the light
assembly.
4. Reinstall the harness connector. Test the light for proper operation
TO REPLACE RIGHT TAILLIGHT:
1. Remove the heat shield covering the light assembly.
2. Remove the harness connector from the back of the light assembly.
3. Remove the 3 fasteners securing the light assembly, and then remove the
assembly.
4. Install the new light assembly, then re-affix and tighten the 3 fasteners.
5. Reinstall the harness connector.
6. Reinstall the heat shield.
7. Test the light for proper operation.
TO REPLACE CENTER TAILLIGHT:
1. Remove the rear rack and rear storage box.
2. Remove the harness connector from the back of the light assembly.
3. Remove the 4 fasteners securing the light assembly, and then remove the
assembly.
4. Install the new light assembly, then re-affix and tighten the 4 fasteners.
5. Reinstall the harness connector.
6. Reinstall the rear rack and rear storage box.
7. Test the light for proper operation.
118
MAINTENANCE
To Next Page
Loading...
