IGNITION SWITCH/LIGHT SWITCH
Use the ignition switch
q
to start the
engine. The key can be removed from
the switch when it is in the OFF
position.
OFF Turn the key to the OFF position to stop the engine. Electrical circuits are off.
RUN Turn the key the RUN position to activate electrical components. Electrical
circuits are on. Electrical equipment can be used.
START Turn the key to the START position to engage the electric starter. See the
Starting the Engine section for starting procedures.
AWD MODE SWITCH (IF EQUIPPED)
The AWD switch
w
controls the All
Wheel Drive (AWD) system. Use this
switch to engage AWD or 2X4. The
vehicle automatically engages AWD
when operating in reverse if the drive
mode is set to AWD.
28
FEATURES AND CONTROLS
To Next Page
Loading...
