58
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 33
107
Brake fluid Ensure proper level 34
Auxiliary brake Ensure proper operation 36
Front suspension Inspect, lubricate if necessary 96
Rear suspension Inspect, lubricate if necessary 96
Steering Ensure free operation -
Tires Inspect condition and pressure 111
Wheels/fasteners Inspect, ensure fastener tightness 112
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 35
97
Coolant level Ensure proper level 105
106
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 32
132
Indicator lights/switches Ensure operation 30
Engine stop switch Ensure proper operation 31
Air filter, pre-filter Inspect, clean 113
Headlamp Check operation 31
115
Brake light/taillight Check operation 119
Riding gear Wear approved helmet, goggles, and
protective clothing
10
Winch (if equipped) Inspect cable and switch 79-90
To Next Page
Loading...
