5. Reinstall the (4) bolts retaining the lower LH frame support to the frame.
Torque bolts to specification.
TORQUE
Lower LH Frame Support Fasteners
37 ft-lbs (50 N·m)
6. Install the left rear wheel and torque wheel nuts to specification.
TORQUE
Wheel Lug Nuts (Aluminum)
75 ft-lbs (102 N·m)
Wheel Lug Nuts (Steel)
45 ft-lbs (61 N·m)
7. Reinstall the seat and remaining body components.
8. Reinstall the rear skid plate and the (6) T40 Torx-headed screws.
9. Start the engine and test the operation of the PVT system.
133
MAINTENANCE
To Next Page
Loading...
