Do you have a question about the Polaris TR36P and is the answer not in the manual?
Battery Type | Lithium-Ion |
---|---|
Battery Life | Up to 120 minutes |
Filter Type | HEPA |
Scheduling | Yes |
Remote Control | Yes |
Virtual Wall | No |
Drop Sensor | Yes |
Bump Sensor | Yes |
Warranty | 1 year |
Power source | Battery |
Dustbin Capacity | 0.6 liters |
Cleaning Modes | Auto, Spot, Edge |
Contact information and support channels for Polaris cleaner owners.
Specifies the tools required for the Polaris cleaner installation process.
Instructions on preparing the pool before installing the Polaris cleaner.
Steps for installing the Universal Wall Fitting (UWF) for the cleaner connection.
Adapting for multiple return lines and restoring circulation after cleaner removal.
Connecting to common return lines and using special fittings for pool/spa setups.
Checking the water pressure to ensure proper cleaner operation.
Adjusting the hose length for optimal reach and performance.
Instructions on how to start and prime the Polaris cleaner for operation.
How to check and ensure the cleaner's wheel speed is within the optimal range.
Troubleshooting steps for when the cleaner's wheel speed is below 28 RPM.
Troubleshooting steps for when the cleaner's wheel speed exceeds 32 RPM.
Instructions on how to adjust the sweep hose motion for optimal cleaning.
How to adjust the thrust jet to ensure the cleaner moves straight and climbs walls.
Steps for emptying the cleaner's debris bag when it's half full.
Guidance on backwashing the pool filter, including cleaner disconnection.
Instructions for storing the cleaner, especially for winter, to prevent damage.
Solutions for when the cleaner gets stuck on obstacles or lacks power.
Addressing erratic movement, poor floor contact, or directional problems.
Resolving issues with tangled hoses or the sweep hose getting sucked into the tube.
Ensuring full pool coverage and fixing cleaners running on their side.
Solutions for cleaners not climbing walls or tires slipping on surfaces.
Diagnosing and correcting wheel speeds outside the optimal range.