What to do if the electric brush on my Polaris Vacuum Cleaner stops?
If your Polaris Vacuum Cleaner's electric brush stops unexpectedly, it's probably clogged with hair, thread, wool, or other debris. To fix this, clean the brush roller. If the roller still doesn't turn after cleaning, you should contact the service center.
What to do if my Polaris Vacuum Cleaner shuts down unexpectedly?
If your Polaris Vacuum Cleaner unexpectedly shuts down during operation, it might be due to the motor overheating, which triggers a protective device. To resolve this, clear any blockages in the dust collector, filter, or attachments that could be causing the overheating. Then, let the appliance cool down for at least 30 minutes before you turn it on again. Alternatively, the battery may be fully discharged, indicated by a flashing red battery charge indicator. In this case, charge the battery.
Why is the suction power insufficient on my Polaris Vacuum Cleaner?
If the suction power of your Polaris Vacuum Cleaner is insufficient or reduces during operation, it's likely due to a blockage. You should clean the dust container, and either clean or replace the filter. Additionally, check the nozzle for any blockages and remove them.
Why is my Polaris Vacuum Cleaner not charging?
If your Polaris Vacuum Cleaner is not charging, first, ensure that the adapter is properly plugged in. If it is, check that you are using the correct type of adapter, specifically the one that was supplied with the device.
How to stop electrical discharges from my Polaris Vacuum Cleaner?
Electrical discharges during operation and dust sticking to the nozzle body of your Polaris Vacuum Cleaner are caused by static electricity due to low indoor humidity. To address this, take measures to humidify the air in your home. Also, regularly hold the nozzle close to metal objects to discharge static.
General| Type | Handheld |
|---|---|
| Dust Collection Type | Bagless |
| Power Source | Battery |
| Battery Type | Li-ion |
| Voltage | 21.6 V |
| Cord Length | Cordless |
| Dust Capacity | 0.5 L |
| Noise Level | 75 dB |
| Filter Type | HEPA |
| Accessories | crevice tool |
Provides an overview of the manual and product details.
Defines the vacuum cleaner's intended household use and operational boundaries.
Details the vacuum cleaner's design and lists all included parts.
Guides users through unpacking and initial assembly of the vacuum cleaner.
Explains how to operate the vacuum for cleaning floors and carpets effectively.
Provides instructions for using attachments to clean furniture and upholstery.
Details the procedure for charging the device's rechargeable battery.
Explains how to remove and replace the vacuum cleaner's battery.
Covers cleaning the dust container, filters, and electric brush.
Offers guidance on proper storage and transportation of the vacuum cleaner.
Lists common problems and their solutions for the vacuum cleaner.
Highlights critical safety precautions for operating the vacuum cleaner.
Lists the technical data and specifications of the PVCS 4000 HandStick PRO.
Details the EU directives and certifications the device complies with.
Explains the terms and conditions of the product's warranty.
To Next Page