To Next PageTo Next PageWhat to do if my Polaris PVCS 7090 HandStick PRO Aqua is not charging?
If your Polaris Vacuum Cleaner isn't charging, ensure the adapter is correctly plugged in and that you are using the adapter that was supplied with the device.
Why does my Polaris PVCS 7090 HandStick PRO Aqua suction power decrease during use?
Reduced suction power in your Polaris Vacuum Cleaner often results from blockages. You should clean the dust container, and either clean or replace the filter. Also, check the nozzle for any obstructions and remove them.
What to do if my Polaris PVCS 7090 HandStick PRO Aqua shuts down unexpectedly?
If your Polaris Vacuum Cleaner shuts down unexpectedly, it could be due to overheating or a fully discharged battery. First, eliminate any causes of overheating, such as a clogged dust collector, filter, or attachments. Then, let the appliance cool down for at least 30 minutes before restarting. If the battery charge indicator is flashing red, charge the battery.
Why does my Polaris PVCS 7090 HandStick PRO Aqua Vacuum Cleaner have electrical discharges?
Electrical discharges and dust sticking to the nozzle of your Polaris Vacuum Cleaner are usually caused by static electricity from low indoor humidity. To resolve this, humidify the air in your home. You can also regularly hold the nozzle close to metal objects to discharge any static buildup.
General| Type | Handheld |
|---|---|
| Dust Capacity | 0.6L |
| Charging Time | 4 h |
| Filtration System | HEPA |
| Color | Blue |
| Power source | Battery |
| Wet and Dry Cleaning | Yes |
| Features | Wet cleaning, Dry cleaning |
| Cord Length | Cordless |
| Filters | HEPA |
| Battery Life | Up to 40 minutes |
