Polaris Virage TX 2000 Service Manual

Spark Plugs
4. Measure gap with a wire gauge. Recommended
spark plug gap is .024 - .028" (.6 - .7 mm), or .32"
(.08mm) on FFI™ models. Adjust if necessary by
bending the side electrode carefully.
5. Coat spark plug threads with a small amount of
anti-seize compound.
6. Install spark plug and torque to specifications.
7. Make sure spark plug caps are screwed completely
onto end of plug wire.
8. Apply a small amount of Nyogel ™ grease to inside of
plug caps and install.
MAINTENANCE/TUNE UP
Engine
Ignition Timing Specifications
Refer to Electrical Section for ignition timing adjustment procedure and timing chart.
Polaris Sales Inc.
2.13
3/00

Polaris Virage TX 2000 Specifications

General

Brand	Polaris
Model	Virage TX 2000
Category	Boat
Language	English