EasyManua.ls Logo

Polaroid 402b - Loading Film Pack Instructions; Steps for Loading Film; Cleaning Film Rollers Procedure; Guide for Cleaning Rollers

Polaroid 402b
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Loading Film
Use Polaroid 8.5 x 10.8 cm (3-1/4 x 4-1/4 in.)
pack films.
1. Grip the film pack holder door latch and lift
open.
Check that the film rollers are clean
(See Cleaning Film Rollers).
2. Open the film pack back.
3. Hold the film pack by its edges and slide it into
the holder.
4. Check that the white tabs are pointed up.
5. Close and latch the door with the black tab
sticking out.
6. Pull the black tab straight out of the holder. A
small white tab appears.
1. Remove the film rollers.
2. Clean both rollers with a damp, lint-free cloth.
Rotate both rollers as you clean them.
Never touch the rollers with anything hard or abrasive.
3. Dry the rollers with a lint-free cloth and replace them.
Cleaning Film Rollers

Related product manuals