Polaroid 430

LOADING
(Cont.)
1. Push the back
door
latch; the door will
pop
up.
4.
Push
the
pack
down into the camera.
18
2.
Open
it
all
the way.
Are
the rollers
(A)
clean?
lf not, clean
them as
described
on
page
38.
3. Hold the film
pack
by
the
edges as
shown,
and
push
the
closed end of the
pack
under
the
door
hinge
against spring
tension.
5.
&
6. Check
to be
sure
that the white tabs are
not caught between the film
pack
and the camera
body.
Close
the back door.
Press
both
sides
firmly to
be sure
that both
sides
latch.
The black
tab
of the
safety
cover must
stick
out of the
small slot.
lf not, reopen the
back, lead
the tab
out.
43O/42O
Donated to www.orphancameras.com