Polaroid 8035 - Page 3

8K Series ProPalette Repair Manual Contents
3
2 Hardware Operating Information (continued)
Terminating the ProPalette Internally................................................... 28
Changing the ProPalette SCSI ID......................................................... 29
Controls, Indicators and Connectors..................................................... 30
Front (Without Camera) ....................................................................30
Keypad............................................................................................... 31
Using the 35mm Camera Back............................................................. 31
35mm Camera Back Description....................................................... 31
Loading 35 mm Film ......................................................................... 32
Using the 4x5 Camera Back .................................................................33
Loading 4x5 Film .............................................................................. 34
Using the 6x7 Camera Back .................................................................35
Loading 6x7 Film .............................................................................. 35
Locking the Film Type Via the Keypad ...............................................40
Locking the Camera Type via the Keypad ........................................... 41
Bulk Camera Support ...........................................................................41
Leaving a Film Leader.......................................................................... 41
Making Exposures ................................................................................ 42
Removing Exposed Film ...................................................................... 43
Rewinding a Partially Exposed Roll.....................................................43
Advancing Film .................................................................................... 43
Removing and Replacing the 35mm Camera Back.............................. 43
Enhanced Information Display.............................................................44
Artifact Warning Indicators.................................................................. 44
Hardware Configuration Display.......................................................... 45
High Density Grids............................................................................... 45
Protecting the CRT and Camera from Dust.......................................... 45
Cleaning the CRT Face......................................................................... 45
Cleaning the Camera Lens.................................................................... 46
Testing the Hardware Installation......................................................... 46
Troubleshooting Hardware and Film Problems.................................... 47
Color Balance and Exposure for Negative Film................................ 47
Running a Self-Test........................................................................... 48
Redisplaying an Error Message......................................................... 48
LCD Panel Messages............................................................................ 48
Setup Menu Reference.......................................................................... 50
Activating Monitor Mode.....................................................................51
Activating Monitor Mode Via Front Panel Buttons .......................... 51
Activating Monitor Mode Via Digital Board .................................... 51
Activating Monitor Mode Via LCD Menu........................................ 52