Polaroid AMA-1850P User Manual

Mesh Grid
Aluminium Line
VHF Frequency Receiver
UHF Frequency
Receiver
Base
Remote Control
Power Supply
1. Find the Best Location for your Antenna
Before connecting your antenna, determine the best spot in your home for optimum reception. To ensure you receive the maximum number
of channels you may want to position the antenna towards your local broadcasting towers. Visit www.antennaweb.org to see a list of local
broadcast towers in your area. Try to avoid any obstructions between these transmitters and your antenna.
Helpful Hints:
1. Avoid metal surfaces as this can interfere with reception.
2. Position the antenna as high as possible, preferably next to a window.
3. If the antenna isn’t performing as expected, try placing in a different location/surface. Then, re-scan for channels on your TV or converter
box.
2. Assembling the Antenna:
Remove all parts from the box and assemble as shown.
360° Motorized Rotating
HDTV Amplified Antenna
USER MANUAL
Item #AMA-1850P
Attach 2 square rods of antenna using
M4x25mm screw & wing nut.
Attach V frequency & aluminium line
using M3x16mm screw.
Attach U frequency & aluminium line
using M3x14mm screw.
Attach mesh grid using 2 M4x10mm screws.
Use wing nut & M4x25mm screw
to connect antenna to base.
Connect L bracket with wing nut
& M4x25mm screw
M4X25mm
Screw
Wing nut
1.
M4X25mm
Screw
M4X25mm
Screw
Wing nut
Aerial boom
2.
M4X25mm
Screw
Wing nut
“L” Bracket
3.
“V” Frequency
M3X16 Screw
Aluminium
Line
4.
“U” Frequency
M3X14 Screw
Aluminium Line
5.
7.
M4X10mm
Screw
6.
Insert antenna
base on to mast
and tighten wing
nuts to hold mast
in place.
Place antenna
vertically
for maximum
reception.

Polaroid AMA-1850P Specifications

General

Brand	Polaroid
Model	AMA-1850P
Category	Antenna
Language	English

Summary

Finding the Best Location for Your Antenna

Helpful Hints for Antenna Placement

Advice on avoiding metal surfaces, positioning high near windows, and trying different locations for better reception.

Assembling the Antenna

Attach Antenna Rods

Connect two square antenna rods using an M4x25mm screw and wing nut for the antenna structure.

Connect Antenna to Base

Attach the main antenna component to the base using a wing nut and M4x25mm screw.

Connect L Bracket

Secure the L bracket to the antenna assembly with a wing nut and M4x25mm screw.

Attach V Frequency Line

Connect the V frequency reception component and aluminium line using an M3x16mm screw.

Attach U Frequency Line

Connect the U frequency reception component and aluminium line using an M3x14mm screw.

Attach Mesh Grid

Install the mesh grid onto the antenna assembly using two M4x10mm screws.

Mount Antenna on Mast

Insert the assembled antenna base onto the mast and tighten wing nuts for stability.

Connecting the Antenna to Your TV

HDTV Connection

Connect the antenna cable directly into the ANTENNA INPUT port on the back of your HDTV.

Analog TV Connection

Plug antenna into a digital converter box, then connect converter box output to TV's ANTENNA INPUT.

Adjusting TV for Best Reception

Scanning for Channels

Limited Warranty Information

Warranty Exclusions and Limitations