Polaroid BIG SHOT User Manual

HOW TO DEVELOP YOUR PICTURE
FIRST, PULL THE WHITE TAB OUT OF THE CAMERA
1. Let the camera hang freely:
Hold it by the flexible T handle.
Don't hold onto the camera body!
THEN, THE YELLOW TAB
3. Grip the center
of the yellow tab.
2. Pull the white tab
(A) ail the way out of the camera: This causes a
yellow
tab (8) to pop out of a narrow opening in the end of the camera .
IF A YELLOW TAB DOES NOT COME OUT,
DON'T PULL ANOTHER WHITE TAB!
The tab usually gets jammed because of dirt in the developer
spreader. First, remove the jammed yellow tab, as shown on page 23.
Then clean the developer spreader (see page 22).
NEVER PULL A WHITE TAB IF YOU CAN SEE A YELLOW TAB,
OR YOU WILL CAUSE THE FILM TO JAM!
If you accidentally pull a white tab while a yellow tab is showing, don't
pull another. 1 nstead, follow the steps shown on page 23.
4 . Pull the yellow tab ail the way out of the camera:
As you pull the tab out with your right hand, pull the camera to your
left with the T handle. Pull smoothly, at medium speed, without slow-
ing down or stopping.
THE PICTURE IS NOW DEVELOPING OUTSIDE THE CAMERA, SO START THE
DEVELOPMENT TIMER RIGHT AFTER PULLING THE TAB OUT . NEXT PAGE, PLEASE.
7

Polaroid BIG SHOT Specifications

General

Brand	Polaroid
Model	BIG SHOT
Category	Digital Camera
Language	English