12 | EN
Turn the controls cover clockwise to close.
SD Card
A microSD card must be present for your Polaroid
Cube to work. To insert a microSD card, use a
coin or other flat object to turn controls cover
counterclockwise. Insert card into slot and gently
push in until you hear a click. Turn the cover
clockwise to close. To remove a card, gently push
the card in, release and the card will slide back out.
If no microSD card is present, your camera will
continously beep and the LED will blink orange
until a new microSD card is inserted.
When your microSD memory is almost
full (1GB remaining), the LED will blink
To Next Page
Loading...
Need help?
General
