EN | 15
Battery & Charging
To charge your Polaroid Cube, plug one end of
the included microUSB cable into the microUSB
port and the other into either a computer or into
a wall plug using a wall adaptor. (The camera can
still be used when charging from the wall.)
While charging, the LED will blink orange.
When battery reaches 10% the LED will
glow orange. Your camera will automatically
shut down if battery level reaches 0%.
Magnet Safety Warnings
The magnet mount on your Polaroid Cube is a
low-powered magnet. As with any magnet, it is
best to follow these safety precautions.
To Next Page
Loading...
Need help?
General
