Polaroid DHX-202 - Video Setup; Brightness, Contrast, Saturation

VIDEO OUT
• YUV
• S-VIDEO
• P-SCAN
13
Basic Setup(continued)
The BRIGHTNESS, CONTRAST, and SATURATION are the same
User Interface. The default setting for the BRIGHTNESS and the
CONTRAST is 6; the default setting for SATURATION is 0.
/
/
/
VIDEO SETUP
1. Press SETUP on the remote control.
2. Use to select item you want.
3. Press OK to confirm the selection.
4. To exit the setup, press SETUP again.
This section includes:
• BRIGHTNESS
• CONTRAST
• HUE
• SATURATION
• VIDEO OUT
P-SCAN
HUE
The default setting is 0.
BRIGHTNESS, CONTRAST, SATURATION
The default setting for the P-SCAN is OFF. If you set it ON
and your TV support this function then it will appear as follows.
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
VIDEO OUT
EXIT SETUP
12
10
8
6
4
2
0
TO SET PRESS
TO QUIT PRESS SETUP
THEN OK
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
VIDEO OUT
EXIT SETUP
TO SET PRESS
TO QUIT PRESS SETUP
THEN OK
+6
+4
+2
0
-2
-4
-6
VIDEO SETUP
TO SET PRESS
THEN OK
TO QUIT PRESS SETUP
YUV
S-VIDEO
P-SCAN
VIDEO SETUP
BRIGHTNESS
CONTRAST
ENABLE PROGRESSIVE
ENSURE YOUR TV SUPPORT PSCAN
IF TV DISPLAY IS ABNORMAL
PLEASE WAIT 8 SECONDS
FOR RECOVER
OK
NO
TO SET PRESS THEN OK
TO QUIT PRESS SETUP
TO SET PRESS THEN OK
TO QUIT PRESS SETUP
VIDEO SETUP
BRIGHTNESS
CONTRAST
PROGRESSIVE SCAN
YOUR PROGRESSIVE IS ON PSAN
DO YOU WANT TO KEEP THE
CURRENT SETTING
PLEASE WAIT 8S
OK
NO
If you select OK, it will appear as below.