2
Look through the camera view-
finder to frame your picture. Hold
the camera steady and press the
shutter button. Keep holding the
camera steady until you hear a beep
sound. The beep indicates that a
picture was taken.
The picture counter on the back of the
camera tells you how many pictures you
have stored in your camera’s memory.
If you don’t use your camera but leave the power on, your camera goes into
power saving mode (to save battery power). When the camera is in power saving
mode, it beeps until you use it or turn the power off.
To take a picture while the camera is in power saving mode, compose your
picture and press the shutter button. The camera turns on and takes the
picture normally.
To Next Page
Loading...
