8 Polaroid I-Zone Combo Digital & Instant Camera User’s Guide
Note:
If a “Camera not found” message displays, turn off
the computer and the camera and make sure the
serial cable is firmly connected. Then turn on the
camera and turn on the computer.
7
To view thumbnail images of the photos in the camera,
press the
Refresh
Thumbnails
button.
8
To select all the photos in the camera, click Click
Select
All
or click on an individual photo to select it.
9
Click
Get Photos
to download the selected photos.
Caution:
Clicking
Delete All Photos
will delete all photos in
the camera.
Troubleshooting
Problem Possible solutions
Computer does not see the
camera. (Digital mode)
• Ensure that the
Mode
switch is
set to digital and the camera
power is turned on.
• Make sure the serial cable is
firmly connected to the camera
and to the computer.
• Turn off the computer and all
peripherals and connect the
camera. Turn on the camera. Turn
on the computer.
• Your serial port may have a
conflict. Another software
application or hardware device
may be using your COMM port
settings. Turn off these other
software and hardware devices
when the digital camera is
connected to your computer.
• Your computer may have an
internal BIOS conflict. See the
documentation that came with
your computer.
combo_upright.book Page 8 Monday, August 7, 2000 12:10 PM
To Next Page
Loading...
Need help?
General
