12. Film type window
13. Back cover latch
14. Battery cover
15. Exposure counter
16. Film rewind switch
17. Film take up spool
18. Film chamber
19. Film rewind shaft
20. Film sprocket wheel
21. Back cover
1. Mode dial
2. Shutter release button
3. CDS sensor
4. Viewfinder
5. Red-eye reduction lamp
6. Flash
7. Zoom ring
8. Lens
9. Whrist strap
10. Flash ready indicator
11. Viewfinder eye piece
Taking pictures with flash
3
10
1. Turn the mode dial to the ON position.
In this mode the camera is set to the AUTO flash mode.
The camera will fire a flash automatically, depending on
the brightness of the scene and speed of the used film.
2. Wait a few seconds for the flash ready indicator (10) to light up.
3. Compose your picture and press the shutter release button. The camera
will take a picture and the flash will fire, only if necessary.
Auto-flash
To Next Page
Loading...
Need help?
General
