Identification of controls
Control buttons
Note:
SOURCE, MENU, CH+/-, VOL+/- and POWER( ) on the main unit have the same functions as the
corresponding buttons on the remote control.
This operation manual provides a description based on operating functions with the remote control.
3
1
2
3
4
5
6
7
1. : Power on/standby
2.SOURCE: To select input signal
3.MENU: To access menu
4.VOL+/-:press to raise/lower the volume or adjust the selected item.
5.CH+/-:press to select a higher/lower numbered channel or cycle through the menus.
6.Power Indicator
7.Remote sensor
To Next Page
Loading...
