Polaroid FXM-1511C - TV Tuner and Channel Setup; Tuner Configuration and Auto Scan

- 25 -
TV Setup and Operation (Continued)
Setup Setting
Auto Scan
Press the ▲▼ button to select the Auto Scan, press the ENTER button to start auto scan. The
screen will display as below:
Auto scan will take a few minutes, when the tuning operation completes the unit will exit and
memorize the programs by sequence automatically.
During tuning, press the MENU button to exit the auto scan mode.
Press the MENU button once to enter the setup
menu. Press the▲▼ button to select Setup
and press the ENTER button to enter the menu
shown on the right.
In the Setup menu, press the▲▼ button to
select the desired item and press the ENTER
button to enter. Press the MENU button to
return to the previous menu.
Tuner/Channel
Press the ▲▼ button to select the
Tuner/Channel and press the ENTER
button to enter the menu as shown on the
right. Press the ▲▼ button to select the
desired item and press the ENTER button
to enter. Press the MENU button to return
to the previous menu.