Sometimes, when you take a
photo it can turn out looking too
dark or too light.This is because
there was either too much or too
little light in the scene when you
photographed it.
You can fix this by using the
lighten/darken control on your
camera.
On the front of your camera
there is a blue button that slides
back and forth. When the blue
button is pushed to the left it
darkens a photo. When the blue
button is pushed to the right it
lightens a photo.
To lighten a photo that is too dark,
slide the blue button all the way to
the right.
Be sure to slide the blue
button back to the center before
you take another photo.
Too Dark
Too Light
7
2
6
How to Take Great Photos
To take a photo of a subject that is
shiny or metallic, or to take a
photo through a window, you need
to do something special so that
your photo turns out right.
Right next to the green shutter
button that you use to take a
photo is a small pink button.
Pressing this button lets you
take a photo without the flash.
So, whenever you take a
photo of something very bright
or metallic, or take a photo
through a window, press this
pink button.
flash
override
button
1
1