10
EXPLANATION:
1 The operator may have handled the film during development.
Never squeeze or bend the film while it is developing. Allow it to
develop undisturbed on a flat surface.
2 If the spots are repetitive through all pictures in the pack, the
rollers are dirty. To clean the rollers, first open the film holder -
take care not to dislodge the film pack. Then remove the roller
assembly and clean both rollers with a water-dampened soft, lint-
free cloth. Rotate both rollers during cleaning.
3 If the spots are repetitive and cleaning doesn’t solve the problem,
the rollers probably have a burr, or scratch, and should be
replaced.
To Next Page
Loading...
