10
Using menu
The menu items in Setting mode provide several options to ne-tune
your video camera functions.
To enter a mode:
1. Turn on the video camera.
2. Press the Mode button.
3. Use the Zoom buttons ( ) to select the desired item.
4. Press the OK button to enter.
Basic operations in the menu:
How to... Action
Move the highlight bar
Use the Zoom buttons ( ) to move up
or down.
Conrm an item Press the OK button.
Exit menu / Go back to
upper menu
Press the Mode/ button.
Menu items in Setting mode
Power-on → Press the Mode button → Enter Setting mode → Press
the OK button.
Item Option Description
Flash
Flash automatically res when needed.
Flash is disabled.
Selftimer
Selftimer is on. The video camera will have a
ten second delay before recording when the
Shutter button is pressed.
Selftimer is off.
Flicker
Set icker frequency to 50Hz or 60Hz. For
more information, please refer to the “Flicker
Settings” table below.
TV-out
This option is suitable for America, Taiwan,
Japan, and Korea areas.
This option is suitable for Germany, Eng-
land, Italy, Netherlands, China, Japan, and
Hong Kong.
Flicker Settings Table:
Area England Germany France Italy Spain Russia
Setting 50Hz 50Hz 50Hz 50Hz 50Hz 50Hz
Area Portugal America Taiwan China Japan Korea
Setting 50Hz 60Hz 60Hz 50Hz 50/60Hz 60Hz