46 | DVD MODE
Preference Setup Page
• TV Type: Select the TV system.
• Audio: Use this item to select the desired audio
language, if your disc contains multiple audio
languages.
• Disc Menu: Use this item to select the desired
language of your disc menu, if your disc menu
contains multiple menu languages.
• Program Control: Use this item to select the desired
program rating.
• Password: Use this item to change the password.
Input the password using the number buttons on the
remote control. The default password is “0000”.
NOTE: If you forget the password, please use the master
password “4711”.
• Default: Use this item to reset to factory settings.
General Setup Page
• TV Display: This setting is for selecting the TV output
mode. Available options:
Normal/PS (Pan & Scan mode), Normal/ LB
(Letter Box mode), Wide: 16:9 (Wide Screen mode).
• OSD Language: This is for choosing your desired OSD
language.
• Screen Saver: Set to ON, a screen saver will appear if
the unit is left idle and no operation is carried out for
five minutes.
• Last Memory: Enter another input source (except
USB) during disc playback, and then back to DVD
input source again, this unit will resume playback
from the point where last playback was stopped, if
Last Memory is set to ON.
Audio Setup Page
• Downmix: Use this item to select the desired audio
output mode. Available options:
- LT/RT: Left/Right mix mode
- Stereo mode.
To Next Page
Loading...