REMOTE CONTROL | 13
5
1
2
2
3
3
4
6
7
8
Push the arm lock to
release the tone arm.
Carefully insert the audio-
line connector to the new
cartridge.
Carefully slide the
cartridge into the
cartridge holder.
Gently clip the cartridge
into the cartridge holder.
Gently pull the audio-
lines from the cartridge,
pull from the terminal
connector and not the
wire itself.
Take off the cap of the
cartridge to expose the
needle.
Separate the cartridge
from the cartridge
holder by loosening
the locker.
Make sure the audio-
lines are not touching
each other.
Be very careful when changing the
stylus cartridge, to avoid damage to the
tone arm and audio wires.
Replacing the stylus
To Next Page
Loading...
General