Polaroid PMP280-4 User Manual

Disconnecting the USB cable:
1. Open the “Safe Device Removal” icon in the task bar, on the
lower right corner of the screen.
2. Select “USB Device” and click “Stop.”
3. When the notication that “It is now safe to disconnect your
device,” disconnect the USB cable from your computer.
Important: to avoid any data loss, always perform a safe USB device
extraction before disconnecting the USB cable.
• Systemrequirements:
• Pentium200MHzorabove
• MicrosoftWindows2000/ME/XP/Vista
• USB port
PCconnection:
InordertoenjoythemultimediacapabilitiesofyourMP3Player,you
havetofirstcopyfilesfromyourPCtoitsinternalmemory.
ConnectyourMP3PlayertothecomputerusingtheincludedUSB2.0
cable.Thedevicewillbedetectedautomaticallywithoutinstallingany
driver.Oncedetected,youcanread/writetothedevice’smemoryjust
asifyouwereusingaregulardiskdrive.
Makesureyourcomputerispoweredon,andfollowthestepsbelow
toconnecttheplayertoyourcomputer.
1. PlugthelargerUSBconnectoroftheUSBcableintotheUSBport
onthecomputer.
2.Plugtheotherend(small)oftheUSBcabletotheplayer.
3.Thecomputersystemdetects“Newhardware”andstartstoinstall
thedriverautomatically.Waitforthesystemtofinishtheinstallation.
Whenithasfinished,“MP3”willbecreatedin“MyComputer”.
Connecting to a computer

Polaroid PMP280-4 Specifications

General

Brand	Polaroid
Model	PMP280-4
Category	Portable Multimedia Player
Language	English